Renesas R5S72625 Doll User Manual


  Open as PDF
of 2152
 
Section 16 Renesas Serial Peripheral Interface
R01UH0134EJ0400 Rev. 4.00 Page 817 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
(2) MSB First Transfer (16-Bit Data)
Figure 16.9 shows the operation of the transmit buffer (SPTX) and the shift register when this
module performs a 16-bit data length MSB-first data transfer.
The CPU or direct memory access controller writes T15 to T00 to the transmit buffer. If the shift
register is empty, this module copies the data in the transmit buffer to the shift register, and fully
populates the shift register. When serial transfer starts, this module outputs data from bit 15 of the
shift register, and shifts in the data from the LSB (bit 0) of the shift register. When the RSPCK
cycle required for the serial transfer of 16 bits has passed, received data R15 to R00 is stored in
bits 15 to 0 of the shift register. After completion of the serial transfer, data that existed before the
transfer is retained in bits 31 to 16 in the shift register. In this state, this module copies the data
from the shift register to the receive buffer, and empties the shift register. If the receive buffer
does not have a space for the receive data length after receive data has been copied from the shift
register to the receive buffer, another serial transfer will not be started. In order to start another
serial transfer, data for the receive data length should be read from the receive buffer to secure the
necessary space in the receive buffer.
If another serial transfer is started before the CPU or direct memory access controller writes to the
transmit buffer, received data R15 to R00 is shifted out from the shift register.