Filter
Top Products
Operation 5-9MN1921
5.5 Digital input/output configuration
The Digital I/O window can be used to setup other digital inputs and outputs.
5.5.1 Digital input configuration
The Digital Inputs tab allows you to define how each digital input will be triggered, and if it
should be assigned to a special purpose function such as a Home or Limit input. In the
following example, digital input 1 will be set to trigger on a falling edge, and allocated to the
forward limit input of axis 0:
1. In the Toolbox, click the Digital I/O icon.
2. At the bottom of the Digital I/O screen, click
the Digital Inputs tab.
The left of the screen shows a column of
yellow icons - High, Low, Rising, Falling
and Rise/Fall. These describe how the
input will be triggered.
3. Drag the Fallingicon
onto the IN1icon . This willsetup IN1 to respond toa fallingedge.