Filter
Top Products
3-2 Basic Installation MN1921
3.1.2 Mounting the NextMove ST
CAUTION: Before touching the unit be sure to discharge static electricity from your
body and clothing by touching a grounded metal surface. Alternatively ,
wear an earth strap while handling the unit.
Ensure you have read and understood the location requirements in section 3.1.1. Mount the
NextMove ST by the four slots in the metal carrier/heatsink assembly. M5 bolts or screws are
recommended.
213 (8.39)
140(5.51)
All dimensions shown as
mm (inches)
127 (5.00)
263 (10.35)
Slot detail
6.5 (0.26)
6 (0.24)
53 (2.09)
Figure 1 - Package dimensions
There must be at least 20mm clearance between the NextMove ST and neighboring
equipment to allow sufficient cooling by natural convection. Remember to allow additional
space around the edges to accommodate the mating connectors and associated wiring
leading to the NextMove ST.