Filter
Top Products
4-10 Input / Output MN1921
4.4.2 Analog output
H Single ended output.
H Voltage range: 0-11V.
H Output current: 30mA maximum.
The analog output provides an independent opto-isolated 0-11 V output for controlling an
additional axis or other external equipment. The output is controlled using the AUXDAC
keyword - see the MintMT help file. Output offset voltage can be controlled by the variable
resistor R35, located just behind the SOUT and SGND pins of the Misc connector .
SOUT
NextMoveST
MintMT
AUXDAC.0
PWM
signal
SGND
GND
Opto-
isol ator
TI TLC272C
Integration of PWM signal
and offs et adjustment
R35
1
2
Figure 11 - Analog output