DigiTech RP360 Musical Toy Instrument User Manual


 
43
RP360 / RP360 XP
Bank Mode
This mode navigates presets in banks of 3� This mode works well if you
prefer to switch between presets during a song and want to create
groups of presets to be used for each song� There are 66 total preset
banks in Bank Mode (33 user preset banks and 33 factory preset banks,
Plexi-Drive 1
1 2 3
BANK: 1
each containing 3 presets)� Banks are selected by turning the SELECT knob, or by using an
optional FS3X for hands-free control�
When in Bank Mode, pressing
FOOTSWITCH 2 and 3 simultaneously will access the Looper
and turn Footswitches 1 and 2 back into preset up/down navigation footswitches (the RP
will essentially work the same as it does in Preset Mode)� Pressing
FOOTSWITCH 2 and 3
simultaneously again will get you back to the preset bank style functionality found in Bank Mode�
The following table shows RP footswitch functionality when in Bank Mode�
RP Footswitch Functions In Bank Mode
BANK FOOTSWITCH MODE
RP
FOOTSWITCH
Plexi-Drive 1
LOOPER READY
SINGLE
FOOTSWITCH FUNCTIONS
Press to select the 1st
preset in the active
bank� Press again to
bypass the preset or
press and hold to
access the Tuner�
Press to select the 2nd
preset in the active
bank� Press again to
bypass the preset or
press and hold to
access the Tuner�
Press to select the 3rd
preset in the active
bank� Press again to
bypass the preset or
press and hold to
access the Tuner�
COMBINATION
FOOTSWITCH FUNCTION 1
Press to bypass all effects in the preset�
Press and hold to access the Tuner�
COMBINATION
FOOTSWITCH FUNCTION 2
Press to toggle between Preset Mode
functionality (preset navigation and Looper
control) and Bank Mode functionality (preset
selection in banks)�
To change the FOOTSWITCH MODE:
1�
Press the SYSTEM button� Ensure you are on the first page in the System Settings menu,
indicated by 1/4 being displayed in the upper right-hand corner of the LCD display� If you are
not, press either the
SELECT knob or SYSTEM button repeatedly until the LCD display reads
1/4�
2� Turn the EDIT 1 (FOOTSWITCH MODE) knob to select the desired Footswitch Mode�
3� Press the BACK button or any FOOTSWITCH to exit the System Settings menu and return to
the Performance state�