Advanced Techniques
DTX502 Owner’s Manual
Setting Parameters using Menu Mode
59
e Voice Number: Voice Name
Use the Voice Number parameter to choose a voice from the
selected category.
KitV3
Volume
q Trigger input source
See q Trigger input source from the description of the KitV2
page.
w Volume
Use this parameter to set the volume of the voice assigned to
the selected layer.
KitV4
Tuning
q Trigger input source
See q Trigger input source from the description of the KitV2
page.
w Tune
Use this parameter to set the tuning of the voice assigned to
the selected layer.
KitV5
Stereo Panning
q Trigger input source
See q Trigger input source from the description of the KitV2
page.
w Pan
Use this parameter to set the stereo panning of the voice
assigned to the selected layer.
KitV6
Decay
q Trigger input source
See q Trigger input source from the description of the KitV2
page.
w Decay
The amount of time it takes a voice to fade away to silence is
referred to as its “decay”. Use this parameter to set the decay
for the voice assigned to the selected layer. Positive values
produce shorter decay times and crisper sounds.
KitV7
Cutoff Frequency
q Trigger input source
See q Trigger input source from the description of the KitV2
page.
w CutOffFreq
Use this parameter to set the filter cutoff frequency for the
voice assigned to the selected layer. Negative values produce
darker sounds and vice-versa.
Settings
The number of available voices varies
depending on the selected category. For
details on the voices in each, refer to the
Voice List (page 85).
NOTE
When “00:NoAssign” is selected as the voice, the layer in ques-
tion will not produce any sound.
Settings
0 to 127
Settings
–24.0 to +24.0 (in 10-cent steps)
NOTE
This setting has no effect when Pad Song ( e ) is selected as the
voice category.
>Ki
t
V3 snareHd˙
” Volume=127 ‚
q
w
>Ki
t
V4 snareHd˙
” tune=+ 0.0 ‚
q
w
Settings
L64 to C to R63
Settings
–64 to 0 to +63
Settings
–64 to 0 to +63
>Ki
t
V5 snareHd˙
” Pan= C ‚
q
w
>Ki
t
V6 snareHd˙
” Decay=+ 0 ‚
q
w
>Ki
t
V7 snareHd˙
”Cu
t
OffFreq=+ 0‚
q
w