Filter
Top Products
Basic Techniques
Practicing in Training Mode
42
DTX502 Owner’s Manual
4.
Set the numbers of measures for which the metro-
nome is to be played and to be silenced.
• Using the [<]/[>] buttons, move the cursor to the parameter you wish to set.
• Turn the data dial to set the corresponding number of measures between 1 and 8.
5.
Press the [ ] button when you are ready to go.
6.
To end training, press the [ ] button once again.
• Your score will be displayed on-screen. The highest possible score is 100 points.
• Press the [SAVE/ENTER] button to return to the training menu page (TRNG1).
Use Tempo Up/Down training to see how fast you can go and still maintain accurate timing. As
you play along with a metronome, the drum module will automatically increase the tempo if your
timing is good and decrease it if not. When you have finished training, your score will be dis-
played on-screen.
Training procedure
1.
Hold down the [SHIFT] button and press the [KIT]
button to access Training Mode.
2.
Turn the Data Dial to select “04:Tempo Up/Down”.
The [ ] button will start flashing, indicating that the drum module is on standby to
start training.
3.
Press the [ ] button when you are ready to go.
4. Tempo Up/Down
tRNG2
” Meas=3 Brk=1
Measures for which the
metronome is not played
Measures for which the
metronome is played
NOTE
Yo u can adjust the training tempo by
turning the Data Dial.
Measure:ƒ
LLLK
Measures for which the
metronome is not played
Measures for which the
metronome is played
NOTE
If you wish to adjust the duration of
training, see the description of the
Timer page from Menu Mode (page
72).
tRNG1
04:tempo Up/Down
NOTE
Yo u can adjust the training tempo by
turning the Data Dial.