Filter
Top Products
Basic Techniques
Performing with a Song
28
DTX502 Owner’s Manual
On the SONG2 page, you can set the current song to be played repeatedly in looped fashion.
1.
Press the [SONG] button.
2.
Navigate to the SONG2 page using the [<]/[>] buttons.
3.
Turn the Data Dial to change the loop setting.
• When Loop is set to “off”, the song will stop automatically when it has played to the
end.
• When Loop is set to “on”, the song will start again from the beginning when it has
played to the end.
On the SONG3 page, you can set whether or not you would like to be counted in before the song
starts.
1.
Press the [SONG] button.
2.
Navigate to the SONG3 page using the [<]/[>] buttons.
3.
Turn the Data Dial to change the count-in setting.
• When PlayCount is set to “off”, you will not be counted in.
• When PlayCount is set to “on”, you will be counted in over two measures.
SONG2
Looping a Song
SONG3
Playing with Count-In
SONG2
” Loop=off ‚
NOTE
The loop setting for User songs is
retained even when the DTX502 is
turned off.
SONG3
”PlayCoun
t
=off ‚
NOTE
The count-in setting applies to all
songs.