Filter
Top Products
Setup
Setting Up for Sound
14
DTX502 Owner’s Manual
1. If you have connected your DTX502 to other audio equip-
ment, ensure that the volume on those devices is turned down
fully.
2. Press the [ ] (Standby/On) button.
The Shutdown page will be displayed on the LCD screen, and
the drum module will turn off.
Your drum module’s default settings—collectively known as the
Factory Set—can be conveniently restored at any time if you have
accidentally overwritten them or wish to delete all of your own
settings. To do so, use the Factory Set function as follows.
1. Press the [ ] (Standby/On) button and turn off the
DTX502.
2. Turn the DTX502 back on while holding down the [<] and
[>] buttons.
The Factory Set page will be displayed on the LCD screen,
and the drum module’s default settings will be restored.
After this, the Initial Setup page will be displayed (page 13).
Turning Off the Drum Module
The drum module automatically stores its system settings
before turning off. For this reason, please do not unplug the
power adaptor until the LCD screen is no longer lit. Unsaved
settings from kits, trigger setups, and the like will be lost when
the drum module is turned off. Be sure to store any modified
settings before doing so.
>>> Shu
t
down <<<
Please wai
t
.
NOTICE
Restoring the Default Settings
When you reset parameters as described below, any changes
you have made to them will be lost. Before proceeding, there-
fore, you should ensure that they contain no irreplaceable set-
tings.
NOTICE
Hold
Fac
t
ory Se
t
ini
t
ialized.