Filter
Top Products
Basic Techniques
Building Your Own Unique Kits
22
DTX502 Owner’s Manual
1.
Navigate to the KIT3 page using the [<]/[>] buttons.
2.
Strike the pad whose instrument tuning or cymbal size
you wish to change.
3.
Turn the Data Dial to change the tuning or cymbal size.
The content of the page will vary depending on the voice category selected for the
instrument in question.
Kick (K), Snare (S), Tom (T), Percussion (P), Effect (E), or Wave
Voice (W):
Raise or lower the parameter value to change the tuning (i.e., pitch) of the voice.
Cymbal (C) or Hi-hat (H):
Raise or lower the parameter value to simulate the effect of changing the cymbal
size.
KIT3
Tuning & Changing Cymbal Sizes
NOTE
As an alternative to selecting a pad by
striking it, you can change the current
selection by pressing the [<]/[>] but-
tons with the [SHIFT] button held
down.
KIt3* Kick
” tuning=+ 0.0 ‚
KIt3* Ride
” Size=+ 0 ‚