Filter
Top Products
En
15
Basic Operation
Basic Operation
Connections
1 Connect headphones to one of the [PHONES] output
terminals.
Connect headphones with an impedance of 32 W or higher. Headphones
with an impedance less than 32 W are not supported.
2 Connect devices such as powered speakers, a power
amplifier, and components to the [MASTER 1] or
[MASTER 2] output terminals.
Powered speakers, etc.
! To output the sound from the [BOOTH] output terminals, con-
nect devices such as speakers to the [BOOTH] output terminals.
3 Connect this unit to your computer via a USB cable.
USB cable (included)
4 Turn on the computer’s power.
5 Connect the AC adapter.
Power cord (included)
To power outlet
AC adapter (included)
6 Press the [STANDBY/ON] switch on this unit’s rear
panel to turn this unit’s power on.
Turn on the power of this unit.
! For Windows users
The message [Installing device driver software] may appear when
this unit is first connected to the computer or when it is connected to
a different USB port on the computer. Wait a while until the message
[Your devices are ready for use] appears.
7 Turn on the power of the devices connected to the
output terminals (powered speakers, power amplifier,
components, etc.).
! When a microphone, DJ player or other external device is connected
to input terminals, the power of that device also turns on.