Filter
Top Products
En
11
Part names and functions
Effect section
The effect units consist of beat FX and release FX.
This section is used to control the two effect units (FX1 and FX2). There
are controls and buttons for operating FX1 on the left side of the con-
troller and FX2 on the right side of the controller. Furthermore, which
channel to apply an effect can be set by the effect assign buttons in
rekordbox.
! For details, see the rekordbox Operating Instructions.
1 1 1 2
3 3 3 4 5
1 Effect parameter controls
Adjusts the beat FX parameter.
2 RELEASE FX control
Turn:
Switches the types of release FX.
Press:
The release FX is on while the control is pressed.
! If the release FX turns on, the beat FX in the same effect unit
turns off.
[SHIFT] + turn:
Adjusts the beat FX time parameter.
[SHIFT] + press:
Switches the beat FX mode.
3 Effect parameter buttons
Press:
Turns the beat FX on and off or switches the parameters.
[SHIFT] + press:
Switches the types of beat FX.
4 BEATc button
Decreases the beat fraction for synchronizing the beat FX effect
sound each time the button is pressed.
[SHIFT] + press:
Sets the beat FX tempo mode to the BPM auto mode. The
track’s BPM value is used as the basis for the effect’s tempo.
5 BEATd button
Increases the beat fraction for synchronizing the beat FX effect
sound each time the button is pressed.
[SHIFT] + press:
Sets the beat FX tempo mode to the BPM tap mode. The BPM value
used as the basis for beat FX is calculated by the interval at which
the button is tapped.
Jog dial display section
1
1 ON JOG INDICATOR
The display items can be changed on the [Deck] tab in [Preferences]
of rekordbox.
The following settings are available.
Deck selection indication:
The deck selected with the [INPUT SELECT] switch is indicated by the
lighting color of the jog.
— Lit in blue: When [DECK1] or [DECK2] is selected
— Lit in white: When [DECK3] or [DECK4] is selected
— Off: When [PHONO/LINE] is selected
Hot Cue Countdown indication:
The jog lights when become near the hot cue position set for the
track being played.
The lighting color is the color set for the hot cue.
Sync indication:
The jog lights according to the SYNC setting of the deck.
— Lit in orange: When the deck is MASTER
— Lit in white: When the deck is SYNC
— Off: When the deck is neither MASTER nor SYNC
Slip mode indication:
The jog lights according to the slip mode state.
— Flashing in red: When the slip mode is on and slip playback
— Lit in red: When the slip mode is on and not slip playback
— Off: When the slip mode is off
On Air indication:
The jog lights according to the On Air state.
— Lit in red: When On Air state
— Off: When not On Air state
Vinyl indication:
The jog lights according to the [VINYL] mode state.
— Lit in blue: When the [VINYL] mode is on
— Off: When the [VINYL] mode is off