Filter
Top Products
C Commands Summary
MiLLennium GPSCard Software Version 4.50 Command Descriptions Manual Rev 1 119
SAVEALMA
This command saves the latest almanac in non-volatile memory.
The option
ONNEW is the default; if a different setting is used, a SAVECONFIG command must be issued or else
ONNEW will resume after a reset.
Bit 21 in the receiver self-test status word (see Table D-5, Page 196) indicates whether the latest almanac received
by the GPS receiver is newer than the almanac saved in non-volatile memory (NVM).
Syntax:
➀
The disable option must be followed by the
SAVECONFIG command to have an effect.
SAVEALMA option
Command Range Values Description Default
SAVEALMA - Command
option onnew Each almanac is saved in NVM upon reception if it is newer than the one already
stored. This will occur continuously.
onnew
stop Stops auto saving.
disable ➀ Stops auto saving and prevents the use of the almanac, saved in NVM, on startup.