Mitsubishi Electronics XD8600 Crib Toy User Manual


  Open as PDF
of 79
 
EN-38
ITEM SETTING FUNCTION
LAMP 1 TIME RESET OK The LAMP 1 operation time is reset to 0.
LAMP 2 TIME RESET OK The LAMP 2 operation time is reset to 0.
FILTER TIME RESET OK The filter operation time is reset to 0.
RESET ALL OK The menu settings are reset to the factory defaults (except the
LANGUAGE, PASSWORD FUNCTION, IMAGE CAPTURE, SCREEN,
and NETWORK settings).
• CINEMAMODEcanbeadjustedonlywhenaTV60,TV50,480i,576ior1080isignalisbeingdisplayed.
• WhenSCARTINPUTissettoON,normalcomputersignalsaren’t projected.
• UseacommerciallyavailableSCART-MiniD-SUB15-pincablewhenconnectingthisprojectorwithanAVdeviceequipped
with the SCART terminal.
• SomeAVdevicesequippedwiththeSCARTterminalaren’t compatible with this projector.
• TheRESETALLprocessmaytakesometimetocomplete.
• YoucannotcarryoutRESETALLforapprox.2minutesafterthelampswitchingorthelamprelayoperation.
FEATURE menu (continued)
Menu operation (continued)
 previous next