Mitsubishi Electronics A1SD75M1/M2/M3 Model Vehicle User Manual


 
9 - 8 9 - 8
MELSOFT
9. SETTING OF POSITIONING DATA AND START BLOCK DATA
9.3 Start Block Data Setting
PURPOSE
Set the start block data of blocks: a single block ranges from the starting
positioning data No. to the end positioning data No.
The start block data can be set between No. 0 and 10 for each axis.
Note that only block No. 0 may be set when AD75P# is selected in Change AD75
model.
For details of the start block data, refer to the AD75 User's Manual.
BASIC OPERATION
1. Choose the axis to which the start block data will be set.
Double-click any of the items.
Doble-click.
2. Set the data on the start block data edit main screen.
DISPLAY/SETTING SCREEN
Double-click to choose from the list box.