Mitsubishi Electronics A1SD75M1/M2/M3 Model Vehicle User Manual


 
11 - 48 11 - 48
MELSOFT
11. POSITIONING DEBUGGING
11.4 Servo Off
PURPOS
E
Turn off the electromagnetic brake of the servomotor in the test mode of the
AD75M to coast the motor.
BASIC OPERATIO
N
1. Using any of the following functions, place the AD75M in the test mode.
Positioning data test (refer to Section 11.2.1)
Start block data test (refer to Section 11.2.2)
Operation test (refer to Section 11.2.3 to 11.2.8)
AD75M servo starting up (refer to Section 7.3.1 to 7.3.4)
AD75M position control gain (refer to Section 11.3)
2. When turning off the servomotor brakes of all axes at the same time, click the
[Online] [Test] [All Axis On/Off] menu.
When turning off the servomotor brake on an axis basis, click the [Online]
[Test] [Designate Off] [Designate #1 Off]/[Designate #2 Off]/[Designate #3
Off] menu.
3. To turn on the servomotor brake, click the [Online] [Test] [All Axis On/Off]
menu.