Mitsubishi Electronics A1SD75M1/M2/M3 Model Vehicle User Manual


 
11 - 17 11 - 17
MELSOFT
11. POSITIONING DEBUGGING
11.1.6 Servo monitor
PURPOS
E
Perform servo monitor, torque control/servo load monitor or servo parameter/servo
parameter error monitor during operation monitor.
With servo monitor, you can check the states of the servo amplifiers and
servomotors connected to the AD75M.
For monitor items, refer to positioning module type A1SD75M1/M2/M3,
AD75M1/M2/M3 User's Manual or the servo amplifier and servomotor installation
guides and instruction manuals.
BASIC OPERATIO
N
1. Perform the basic operation in Section 11.1.2 to display the operation monitor
main screen.
2. Click the "Servo" button on the operation monitor main screen.
3. Click the <<Servo moni.>>/<<Torq. moni./Servo load>>/<<Servo moni.
[param./error]>> tab in the Servo Monitor dialog box.
4. To exit, click the "Close" button.
DISPLAY/SETTING SCREEN
[Servo monitor]