Filter
Top Products
10 - 1 10 - 1
MELSOFT
10. POSITIONING MODULE DATA WRITE/READ/VERIFY
10. POSITIONING MODULE DATA WRITE/READ/VERIFY
Perform write to AD75/read from AD75/verify AD75 data, and data transfer between
flash ROM and OS memory in the AD75.
OS memory
Parameters
Positioning data
No. 1 to 100
Start block data
Positioning data
No. 101 to 600
Flash ROM
OS memory
Positioning data
No. 1 to 100
Start block data
Positioning data
No. 101 to 600
Buffer memory
Parameters
Positioning data
No. 1 to 100
Start block data
Monitor data/control
data area, etc.
W
rite to AD75/read from AD75/verify
A
D75 data
Flash ROM write/read
AD75 Positioning module
10.1 Write to AD75/Read from AD75/Verify AD75 Data
PURPOSE
On the peripheral device, write, read and verify the set data (parameters,
positioning data, start block data) on an axis basis.
Read from AD75/verify AD75 data can be performed when the main screen is
displaying the icons.
For write to AD75, the full range can be selected when the main screen is
displaying the icons, and only the data being displayed can be written when the
main screen for parameters, positioning data or start block data is being displayed.
BASIC OPERATION
1. Click the [Online] → [Write to AD75] ( )/[Read from AD75] ( )/ [Verify
AD75 data] menu.
If the current module type is different from the project model, the confirmation
dialog box appears.
Check the current module type and the project's Change AD75 model.
2. Set the data type and range in the Write/Read/Verify dialog box.
3. Click the "OK" button to start operation.
4. For AD75 data verify, the verify result appears.
10