Filter
Top Products
7
Chapter 1: Safety
SSL/CSL Series hopper loaders and SSIL/CSIL Series sight glass hopper loaders are designed
to provide safe and reliable operation when installed and operated within design specifications,
following national and local safety codes.
To avoid possible personnel injury or equipment damage when installing, operating, or
maintaining this equipment, use good judgment and follow these safe practices:
; Follow all SAFETY CODES.
; Wear SAFETY GLASSES and WORK GLOVES.
; Disconnect and/or lock out power before servicing or maintaining the
hopper loader.
; Use care when LOADING, UNLOADING, RIGGING, or
MOVING this equipment.
; Operate this equipment within design specifications.
; OPEN, TAG, and LOCK ALL DISCONNECTS before working on
equipment. You should remove the fuses and carry them with you.
; Make sure the hopper loader and components are properly
GROUNDED before you switch on power.
; Do not jump or bypass any electrical safety control.
; Do not restore power until you remove all tools, test equipment, etc.,
and the hopper loader and related equipment are fully reassembled.
; Only PROPERLY TRAINED personnel familiar with the
information in this manual should work on this equipment.