Filter
Top Products
10
• Removable inlets on 0.2, 0.4, 0.8, and 1.6 cu. ft. (5.6, 11.3, 22 and
45 liter) models only
• Glazed polyester reinforced flat filter
• Hopper-mounted junction box with 12 feet (3.6 m) of cable to a
field-mounted 115/1/60 control box
• Material demand/level sensor
• Series One Plus models include a proximity level sensor for volume
filling, built-in proportioning, and a batch counter; SPV/CPV
available separately
• High-performance centrifugal motor with electrical quick
disconnect
• 9-foot (2.7 m) power cord
• Aluminum pickup wand with ten (10) feet (3 m) of flexible vinyl
hose and two (2) hose clamps
• SSL/CSL06, SSL/CSL11, SSL/CSL23 and SSL/CSL45 include a
counter-weighted type flapper and accumulator blowback for
improved filter cleaning.
SSIL/CSIL Series Sight Glass Hopper Loaders
• Pyrex™ 0.02 cu. ft. (0.57 liter) or 0.09 cu. ft. (2.55 liter) sight
glass. (The SSIL/CSIL 03 uses the smaller sight glass and the
SSIL/CSIL 06 and SSIL/CSIL 11 use the larger size).
• Brushed stainless steel construction, with stainless steel product
contact surfaces
• High-performance centrifugal motor
•
3
/8” (about 9.5 mm) high flow blowback valve with electrical quick
disconnect and accumulator
• Glazed polyester reinforced flat filter
• Aluminum pickup wand with ten (10) feet (3 m) of flexible vinyl
hose and two (2) hose clamps
• Minimum inventory on molding machine
• 9-foot (2.7 m) power cord
• 4” (101.6 mm) square flange on 0.1 cu. ft. (2.8 liter) model
• 7” (177.8 mm) square flange on 0.2 and 0.4 cu. ft. (5.6 and 11.3
liter) models
• 1
1
/2” OD (about 38.1 mm OD) material inlet
• Hopper capacities of 0.1, 0.2, and 0.4 cu. ft. (2.8, 5.6, and 11.3
liters); side outlet