Filter
Top Products
33
Note: Press and hold the
CLEAR
UP key and DOWN key together
simultaneously while applying power to restore all factory
defaults.
As the controller powers up, the screen displays in succession:
•
PLUS
for three seconds
• the software version number
n.nn
• the standby mode display.
4. Press the
SCROLL
SCROLL key repeatedly until the screen displays
3
,
the percentage of Material B menu.
5. Press the
S
START/STOP
START/STOP/SELECT/SET key to select this
menu.
6. Press the
UP key to increase the percentage of material B;
press the
DOWN key to decrease the % of material B.
7. When the screen displays the percentage of Material B you want,
press the
S
START/STOP
START/STOP/SELECT/SET key to set that
value.
8. Press the
S
START/STOP
START/STOP/SELECT/SET key to start the
hopper loader.
The Vacuum LED lights and the vacuum motor conveys
material until the proximity sensor indicates the hopper loader is
full or sixty seconds passes, whichever comes first.
The LED display shows the elapsed conveying time.