Filter
Top Products
microKORG XL
76
SYNC.NOTE (LFO Sync Note) .............................................. [8/1…1/64]
Sets the LFO frequency as a proportion of the tempo set by the [TEMPO]
knob.
NOTE
This parameter will be displayed and can be set if “LFO SYNC” is ON.
J p. 66 “SYNC.NOTE (LFO Sync Note)”
LFO WAVE (LFO Waveform) ............... [SAW, SQUARE, TRIANGLE, SINE, S&H]
Selects the LFO waveform.
J p. 66 “LFO WAVE (LFO Waveform)”
LFO SHAPE ..........................................................................[–63…+63]
J p. 66 “LFO.SHAPE”
KEY SYNC (LFO KeySync) ............................................................[OFF, ON]
Specifies whether the LFO will be reset by note-on.
J p. 67 “KEY SYNC (LFO KeySync)”
INI.PHASE (LFO Init Phase)...................................................[000…180°]
Sets the starting location of the waveform.
NOTE
This parameter will be displayed and can be set if “KEY SYNC” is ON.
J p. 67 “INI.PHASE (LFO Init Phase)”
LFO.SPRD (LFO Spread) ...................................................[–180…+180°]
Sets the LFO phase difference between the left and right channels.
14. PHASER (Stereo Phaser)
Left
Right
Resonance
LFO Shape
LFO Spread
LFO
Dry / Wet
Dry / Wet
High Damp
Stereo In - Stereo Out
Phaser
Phaser
This effect creates a swell by shifting the phase. You can add spread to the
sound by offsetting the phase of the left and right LFOs from each other.
DRY/WET...................................................... ["DRY", 99:1…1:99, "WET"]
Sets the balance between the effect and dry sounds.
TYPE................................................................................. [BLUE, U_VB]
Selects the phaser type.
MANUAL ......................................................................... [000…127]
Sets the frequency to which the effect is applied.
MOD.DEPTH (Modulation Depth) ...................................... [000…127]
Sets the depth of LFO modulation.
RESO (Resonance) ........................................................... [000…127]
Sets the resonance amount.
PHASE.......................................................................................... [+, –]
Switches the phase of the output and feedback.
LFO SYNC (LFO Tempo Sync) .......................................................[OFF, ON]
Specifies whether the LFO cycle will be synchronized with the tempo speci-
fied by the [TEMPO] knob or MIDI clock.
J p. 66 “LFO SYNC (LFO Tempo Sync)”
LFO FREQ (LFO Frequency) .........................................[0.01…100.0Hz]
Sets the LFO speed.
J p. 66 “LFO FREQ (LFO Frequency)”
SYNC.NOTE (LFO Sync Note) ..............................................[8/1…1/64]
Sets the LFO frequency as a proportion of the tempo set by the [TEMPO]
knob.
NOTE
This parameter will be displayed and can be set if “LFO SYNC” is ON.
J p. 66 “SYNC.NOTE (LFO Sync Note)”
LFO WAVE (LFO Waveform)................[SAW, SQUARE, TRIANGLE, SINE, S&H]
Selects the LFO waveform.
J p. 66 “LFO WAVE (LFO Waveform)”
LFO.SHAPE ......................................................................... [–63…+63]
J p. 66 “LFO.SHAPE”