GTO GP-SW050 Safety Gate User Manual


  Open as PDF
of 37
 
28
Safety Edges
Warning Sign
Warning Sign
Safety EdgeSafety Edge
Master Operator
Slave Operator
Use Rigid Conduit
for inbound AC.
Use Rigid Conduit
for inbound AC.
Use PVC Conduit
for Receiver
Safety Edge
Safety Edge
Dual Gate Interface
Run Belden Wire® ONLY in its
own conduit, 22 AWG ,
1-pair shielded with GROUND.
Operator
OperatorOperator
OPTIONAL
Closed Position
Positive Stop Plates
OPTIONAL Closed Position
Ground Stop Post and Plate
Photo Beams
R4222
(NOT INCLUDED)
Photo Beams
R4222
(NOT INCLUDED)
Receiver
RB709U
(NOT INCLUDED)
NOTE: A separate gate or entrance must be installed for pedestrian use. Not shown here.
Overview of a Dual Gate Operator Installation
Thediagrambelowisanexampleofadualswinggateinstallationwithrequiredsafetyfeatures.Theoperatorsmustbeinstalledontheinsideof
the gate. You must install safety edges and photo beams (not included) to reduce the possibility of bodily injury.
 previous next