9
This unit must only be installed by an experienced technician.
Preparation of the Gate
Before installing the GTO swing gate operator, make sure:
• thegateisproperlyinstalled.
• thegateisplumb,level,andmovesfreely.
• thegatedoesnotbindordragontheground.
Installing the Gate Operator
Overview of a Single Gate Operator Installation
Thediagrambelowisanexampleofasingleswinggateinstallationwithrequiredsafetyfeatures.The
operator must be installed on the inside of the gate. You must install safety edges and photo beams
(not included) to reduce the possibility of bodily injury.
Use rigid conduit
for inbound AC wire.
Use PVC conduit
for Receiver wire
Safety Edge
Warning Sign
Receiver
AC POWER
Safety Edge
Photo Beam
Operator
Safety Edge
Photo Beams
Photo Beams
Photo Beam
NOTE: A separate gate or entrance must be installed for pedestrian use.