Filter
Top Products
18
OWNER’S MANUAL
SECTION 4
Operator Training and Education
♦
Ethylene Oxide sterilization procedures must be supervised by personnel trained and
well informed in the safe use of such sterilant materials.
♦ Personnel working with ethylene oxide must have had comprehensive instruction in the
process. This instruction must cover the relevant health hazards (See MSDS on page 68),
relevant national regulations (e.g. OSHA regulation 29 CFR Part No. 1910 Standard No.
1910.1047), methods for safe use and methods to detect escape of sterilant material (e.g.
AN 93 Airscan Badges)
♦ Regular in-service programs relating to the process must be conducted and an attendance
record and evidence of understanding must be kept for each employee (e.g. Andersen
Key Operators Test)
.
© Andersen Products Ltd