Filter
Top Products
14
OWNER’S MANUAL
3.3. Insert the purge tube into the sterilization liner bag with the plastic
ball towards the rear of the bag and the neck towards the opening. Then,
gather the open end of the sterilization liner bag around the aluminum
neck of the purge tube, taking care to ensure you have left no openings.
3.4. Slip the black Velcro
®
strap around the outside of the sterilization
liner bag and thread the pointed end of the strap through the square black
loop. Pull the Velcro strap firmly and then wind it back around the ex-
posed surface of the strap. Make sure that the Velcro strap is secure
and provides an airtight seal between the aluminum neck of the
purge tube and sterilization liner bag.
3.4.a. This is how the secured sterilization liner bag and purge
tube should appear.
3.6. With the cabinet door open, press the PURGE button.
LOAD STERILIZER BAG
CLOSE BAG OVER TUBE
PURGE BAG
EXIT PURGE
3.5. If the purge tube has been disconnected from the sterilizer by means
of the quick release, simply reattach it by pressing the male and female
ends together until they click.
Neck. Wrap the sterilization bag around aluminum
bobbin and secure with the Velcro strap
Quick Release
Connector
(Female end)
Purge tube,
this end is
connected to
upper cabi-
net.
One-way Check valve
End Goes
Into Liner
Bag
PURGE TUBE ASSEMBLY
Quick Release
Connector
(Male end)
© Andersen Products Ltd