Filter
Top Products
MX49/MX61 Owner’s Manual
39
Shift Function List
Some of the important functions and operations on the instrument can be executed with convenient panel control
shortcuts. Simply hold down the [SHIFT] button and press the indicated button (as described below).
Display Messages
Appendix
Operation Function
[SHIFT] + [INC]/[DEC]/[DATA] dial Increases/decreases the value by 10. (Program number in the Play mode; parameter
value in the Edit mode)
In the Performance Select display, this switches among the Performance groups.
[SHIFT] + [SPLIT] In the Performance top display, this replaces Part 1 with Part 2 (Invert function).
[SHIFT] + [LAYER] In the Performance top display, this copies a selected Part (Part 1 or Part 2) to the
other Part (Unison function).
[SHIFT] + [EXIT] Calls up the Performance top display.
[SHIFT] + [SELECT] Resets Performance 1 to the factory settings, and calls up the top display of
Performance 1 (Quick Reset function).
[SHIFT] + [KNOB FUNCTION] Instantly resets Knobs [A] – [D] to Function 1.
[SHIFT] + [PART 1-2 LINK] Resets [PART 1-2 LINK] to on.
[SHIFT] + [ARP] Calls up the Arpeggio display of Performance Part Edit.
[SHIFT] + desired Category button Instantly calls up the top Voice the next Sub Category of the selected Category.
Perform this operation with the same Category button repeatedly to select the
subsequent Sub Categories.
NOTE For details about Sub Categories, see the “DATA LIST” PDF document
LCD indication Description
All remote templates stored. Appears when you store the Control Template in the Remote mode.
Are you sure? Confirms whether you want to execute a specified operation or not.
Auto power off disabled. Appears when Auto Power Off is disabled (by simultaneously holding down the lowest key on the
keyboard and turning the power on).
Bulk protected. Bulk data cannot be received because of the Utility setting.
Clear edit Voice? Appears when executing Performance Store while modifying but not yet having stored a Voice.
Make sure to confirm whether the edited Voice data should be erased or not.
Completed. The specified load, save, format, or other Job has been completed.
Connecting USB device . . . Currently recognizing the USB flash memory connected to the USB [TO DEVICE] terminal.
Device number is off. Bulk data cannot be transmitted/received since the device number is off.
Device number mismatch. Bulk data cannot be transmitted/received since the device numbers don’t match.
Executing . . . A Format operation or Job is being executed. Please wait.
FactorySet . . . The Factory Set operation is automatically being executed when you turn the power on.
File already exists. A file having the same name as the one you are about to save already exists.
File not found. The file of the specified type cannot be found.
Illegal file name. The specified file name is invalid. Try entering a different name.
Illegal file. The file specified for loading is unusable by this instrument or cannot be loaded in the current
status.