Filter
Top Products
2–Pump 20-Station Controllers Operation 37 of 51
Figure 20: Alarm Log Screen
To scroll up and down through the list, touch ▲ and ▼ at the bottom of the list.
Silencing Alarms
Whenever a new alarm occurs, your controller sounds the horn and turns on the strobe light at
each central alarm.
Touch Alarm Silence on the alarm message banner that appears when a new alarm occurs
or press the physical push button included in the central alarm option.
The horns and lights at the central alarms turn off. Your controller has separate, configurable
settings for how long the horns should remain silent and how long the lights should remain
off. (see “Setting U1p Alarm Duration” on page 19). If the alarm condition still exists when
either of these times elapses, the corresponding device (horn or lights) turn on again and the
alarm message banner appears with a “Suppression/Silence Time Expired” message. If a new
alarm occurs, both horns and lights turn on. See page 436 for a list of alarms and their
possible causes.