Filter
Top Products
2–Pump 20-Station Controllers Operation 35 of 51
Figure 18: “Transfer To Standby Pump” Screen
6. Touch Source Pump. The keypad pops up.
7. Enter the number of the failed pump. Use
(Backspace Key) to erase any
mistakes. Use
(Enter Key) to enter the value. The number appears under
Source Pump.
8. Touch Standby Pump. The keypad pops up.
9. Enter the number of the standby pump. Use
(Backspace Key) to erase any
mistakes. Use
(Enter Key) to enter the value. The number appears under
Standby Pump, and a button labeled Transfer to Standby Pump appears on the
screen.
Figure 19: Transfer To Standby Pump Button
Note: When you enter the second pump number, the controller checks to make sure that
both pumps are offline and that the standby pump has no stations assigned to it.