Filter
Top Products
2–Pump 20-Station Controllers Installation 15 of 51
Figure 3: “Menu” Screen
2. At the “Menu” screen, (Figure 3), touch the System Setup button. The “System
Setup” screen opens.
Figure 4: “System Setup” Screen Before Setup
Stations
19-20
3. At the “System Setup” screen, (Figure 4), touch Stations Present. A keypad pops up.
4. Enter the total number of stations (1-20) to be controlled by the system. Use
(Backspace Key) to erase any mistakes. Use
(Enter Key) to enter the value. The
keypad disappears, and the new setting appears under Stations Present.
5. Touch Pumps Present. A keypad pops up.