Filter
Top Products
Ambilight+hue.
To select the bulbs for Ambilight+hue…
1 - In the
Configure Ambilight+hue
menu, click
Hue bulbs
.
2 - Mark the bulbs that have to follow the Ambilight. To mark a
bulb, click on the bulb name.
3 - When you’re done, click
OK
.
With the bulbs marked for Ambilight+hue, go to page
Configure bulb
.
Configure Bulb
In the following step, you will configure each
Philips Hue bulb
.
To configure each Hue bulb…
1 - Click on the bulb name in the
Configure Ambilight+hue
menu. The bulb you selected is blinking.
2 - First indicate where you placed the bulb relative to the TV. A
correct setting of the
Angle
will send the correct Ambilight
colour to the bulb. Click inside the slider bar to adjust the
position.
3 - Secondly, indicate the
Distance
between the bulb and the
TV. The further away from the TV, the weaker the Ambilight
colour. Click inside the slider bar to adjust the distance.
4 - Finally, set the
Brightness
of the bulb. Click inside the slider
bar to adjust the brightness.
5 - To stop configuring this bulb, click
OK
.
6 - In the
Configure Ambilight+hue
menu, you can do the same
each bulb.
7 - When all Ambilight+hue bulbs are configured, click
Finish
.
Ambilight+hue is ready for use.
You can always change the Ambilight+hue configuration later.
To change the configuration, press
and click
Setup
>
Ambilight
>
Ambilight+hue
>
Configure
.
Immersion
With
Immersion
, you can adjust the level of the Ambilight effect
for the Ambilight+hue bulbs.
To adjust the Ambilight+hue Immersion…
1 - Press
and press
(left)
Setup
.
2 - Click
Ambilight
>
Ambilight+hue
>
Immersion
and click
inside the slider bar to adjust the value.
3 - Press
BACK
repeatedly if necessary, to close the menu.
View Configuration
In
View configuration
, you can consult the current
Ambilight+hue configuration. Which network you use, how
many bulbs are connected, etc.
To view the current Ambilight+hue setup…
1 - Press
and press
(left)
Setup
.
2 - Click
Ambilight
>
Ambilight+hue
>
View Configuration
.
3 - Press
BACK
repeatedly if necessary, to close the menu.
Advanced Ambilight Settings
Wall Colour
With
Wall Colour
, you can neutralise the influence of a
coloured wall on the Ambilight colours. Select the colour of the
wall behind the TV and the TV will modify the Ambilight colours
to appear as they are intended.
To select the colour of the wall . . .
1 - Press
and press
(left)
Setup
.
2 - Click
Ambilight
>
Advanced
>
Wall Colour
.
3 - In the colour palette, click the colour that matches the colour
of the wall behind the TV.
4 - Press
BACK
repeatedly if necessary, to close the menu.
TV Switch Off
With
TV Switch Off
, you can set Ambilight to switch off
immediately or slowly fade out when you switch off the TV. The
slow fade out gives you some time to switch on the lights in
your living room.
To select the way how Ambilight switches off…
1 - Press
and press
(left)
Setup
.
2 - Click
Ambilight
>
Advanced
>
TV Switch Off
.
3 - Click
Fade Out to Off
or
Immediate Switch Off
.
4 - Press
BACK
repeatedly if necessary, to close the menu.
Lounge Light Mood
When the TV is on Standby, you can switch Ambilight on and
create a Lounge Light effect in your room.
To switch Ambilight on while the TV is on Standby, press
(Ambilight).
To change the Lounge Light Mood, press
(Ambilight) again.
To switch off Lounge Light, press and hold
(Ambilight) for a
few seconds.
To select the a preset mood colour for Lounge Light…
1 - Press
and press
(left)
Setup
.
2 - Click
Ambilight
>
Advanced
>
Lounge Light
.
3 - Click the mood you want.
4 - Press
BACK
repeatedly if necessary, to close the menu.
Lounge Light+hue
If you installed Ambilight+hue, you can let the hue bulbs follow
Lounge Light from Ambilight. The Philips hue lamps will expand
the Lounge Light effect across the room. The hue bulbs are
75