Filter
Top Products
DVI to HDMI
If you still own a device that only has a DVI connection, you can
connect the device to any of the
HDMI
connection with a DVI
to HDMI adapter.
Connect the audio L/R cable to the
AUDIO IN
connector (mini-
jack 3.5mm).
Y Pb Pr
Y Pb Pr - Component Video is a high quality connection.
The YPbPr connection can be used for High Definition (HD) TV
signals. Next to the Y, Pb and Pr signals add the Audio Left and
Right signals for sound.
Match the YPbPr (green, blue, red) connector colours with the
cable plugs when you connect.
Use an Audio L/R cinch cable if your device also has sound.
Scart
SCART is a good quality connection.
The SCART connection can be used for CVBS and RGB video
signals but cannot be used for High Definition (HD) TV signals.
The SCART connection combines video and audio signals. The
SCART connection also supports NTSC playback.
Audio Out - Optical
Audio Out - Optical is a high quality sound connection.
This optical connection can carry 5.1 audio channels. If your
device, typically a Home Theatre System (HTS), has no HDMI
ARC connection, you can use this connection with the Audio In
- Optical connection on the HTS. The Audio Out - Optical
connection sends the sound from the TV to the HTS.
You can set the type of the audio out signal to fit the audio
capabilities of your Home Theatre System.
For more information, press
Keywords
and look up
Audio
Out Settings
.
If the sound does not match the video on screen, you can adjust
the audio to video synchronisation.
For more information, press
Keywords
and look up
Audio
to Video Sync
.
4.2
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device with the TV
remote control. EasyLink uses HDMI CEC (Consumer
Electronics Control) to communicate with the connected
devices. Devices must support HDMI CEC and must be
connected with an HDMI connection.
12