Filter
Top Products
Setup Lexicon
3-54
PERFORMING MANUAL OUTPUT LEVEL CALIBRATION
Selecting the MANUAL SPEAKER SETUP menu LEVELS CALIBRATION option displays the LEVELS CALIBRATION menu to manually calibrate
output levels.
Note the following:
• You should use a Sound Pressure Level (SPL) meter to manually
calibrate output levels. An SPL meter is a device that measures
the relative loudness of the speakers to ensure accurate output
level calibration. SPL meters are available at Radio Shack.
• Output levels should be calibrated from the primary listening
position, placing the SPL meter at the approximate location
where the listener’s head will be during listening.
• Output levels for speakers that are not included in the speaker
setup cannot be adjusted during the internal noise test. These
output levels can be adjusted during the external noise test,
but there is no need to do so.
SPEAKERSSETUP MANUAL LEVELS CALIBRATION
INTERNAL NOISE
MANUAL SPEAKER SETUPSPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
C
R SR RR
L SL RL
M
SUB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
SET CROSSOVERS
BEFORE CALIBRATING
CUSTOM SETUP
LEVELS CALIBRATION
INTERNAL NOISE TEST
CUSTOM SETUP
SPEAKER LEVEL ADJUST
FRONT LEFT
CENTER
FRONT RIGHT
SIDE RIGHT
REAR RIGHT
REAR LEFT
SIDE LEFT
MONO SUB
SUB RIGHT
LFE
UNITS
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
N/A
N/A
-18.0 to +12.0dB
EXTERNAL NOISE TEST
BASS PEAK LIMITERS
!CAUTION!
HIGH AUDIO LEVELS
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
LIVE! CALIBRATION