Filter
Top Products
MC-12 Mode Adjust
5-27
MUSIC
The DTS THX MUSIC listening mode is designed for playback of
5.1-channel DTS music sources when the side and rear speakers are
present. ASA processing is applied to signals sent to the rear
speakers. Refer to the ASA parameter description on page 3-32 for
more information. This mode is recommended for home theaters
with THX-certified speaker setups.
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-37 for detailed
descriptions
.
Note:
The DTS THX MUSIC listening mode can only be activated with the front
panel or remote control Mode buttons.
&
This mode decodes 5.1 matrix or 6.1 discrete channels from DTS-ES
sources. It is designed for playback of 5.1-channel DTS, 5.1-channel
matrix encoded DTS-ES, and 6.1-channel discrete-encoded DTS-ES
sources.
The six decoded main channels are full frequency. The .1 channel,
often referred to as LFE information, has a limited frequency range
of 120Hz.
The listening mode name differs depending on the encoding
present in the input source, the DECODING parameter setting, and
the speaker setup. Refer to page 5-21 for more information.
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-37 for detailed
descriptions
.
Input Source
Parameter Setting
5.1-Channel DTS
5.1-Channel
Matrix-Encoded DTS-ES
6.1-Channel
Discrete-Encoded DTS-ES
ES DECODING: AUTO
DTS THX UL2Cin DTS-ES THX DTS-ES THX
ES DECODING: ON
DTS-ES THX DTS-ES THX DTS-ES THX
ES DECODING: OFF
DTS THX UL2Cin DTS THX UL2Cin DTS THX UL2Cin
Option/Parameter Default Setting Possible Settings
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS Refer to page 5-35
CUSTOM Refer to page 5-35
MUSIC
MODE ADJUST
Option/Parameter Default Setting Possible Settings
LFE MIX +0.0dB -10.0 to +0.0dB
ES DECODING AUTO AUTO, ON, OFF
OUTPUT LEVELS Refer to page 5-35
CUSTOM Refer to page 5-35
MODE ADJUST
OR