Lexicon MC-12 Baby Monitor User Manual


 
MC-12 Setup
3-23
CUSTOM SPEAKER SETUPS
Selecting the CROSSOVER SETUP menu CUSTOM SETUP option
opens the CUSTOM SETUP menu, which assigns independent
crossover points for each Main Zone audio output connector.
Crossover points can be selected in 10Hz increments within a 30 to
120Hz range. The graphs shown on the next page indicate the
frequency response of each crossover point.
To configure a custom speaker setup:
Select the crossover point closest to the low frequency rating of
the associated speakers. For example, set the FRONT L/R
parameter to the crossover point closest to the low frequency
rating of the front speakers.
Select the subwoofer crossover point equal to the lowest
crossover point of any of the other speakers. For example, if
CUSTOM SETUP menu parameters are set as shown above, set
the SUB XOVER parameter to 80Hz – the lowest crossover point
of the other speakers.
In a custom setup, low frequencies are generally redirected from
speakers with the highest crossover points to speakers with the
lowest crossover points. Signals lower than the lowest crossover
point are redirected to the subwoofer. If the lowest crossover point
is FULL, low frequency signals, excluding LFE information, are not
redirected to the subwoofer.
Low frequencies between the Subwoofer L/R and any or all of the
other speaker channels can be duplicated. To do this, select the
FULL + SUB crossover setting for the front, center, side or rear
speakers. Making this selection can result in excessive bass.
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
CUSTOM SETUP
40 Hz
60 Hz
60 Hz
60 Hz
40 Hz
OFF
N/A
APART
CROSSOVER SETUP
CUSTOM SETUP
THX SETUP
C
R SR RR
L SL RL
M
SUB
80Hz
80Hz
80Hz
80Hz
80Hz
80Hz
80Hz
80Hz
SET CROSSOVERS
BEFORE CALIBRATING
CUSTOM SETUP
FRONT L/R
CENTER
SIDE L/R
REAR L/R
SUB XOVER
80 Hz
80 Hz
80 Hz
80 Hz
80 Hz
OFF
OFF
SUB L/R
N/A
LFE
ULTRA2 SUB
BGC
ASA
MONO
APART
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
LIVE! CALIBRATION
SPEAKERSSETUP SET CROSSOVERS CUSTOM SETUP