Filter
Top Products
MC-12 Setup
3-7
ASSIGNING AUDIO & VIDEO INPUT CONNECTORS
The MC-12 has 12 inputs, each of which can be assigned to any (depending on compatibility) of its 13 digital audio, 8 analog audio, 5
composite video, 8 S-video, or 4 component video input connectors.
The table below indicates the INPUT SETUP menu parameters that
can be used to assign audio and video input connectors. The ANLG
IN LVL parameter can be used to adjust 2-channel and 5.1 analog
audio input levels for the selected input.
Note:
The digital audio input connectors are compatible with PCM (44.1, 48,
88.2, and 96kHz), Dolby Digital and DTS(-ES) sources. The digital
audio input connectors are not compatible with MPEG or MP3 sources.
DIGITAL IN COAX-1 TO 6, OPTICAL-1 TO 6, AES/EBU, NONE
Opens the DIGITAL IN menu, to assign a digital audio input
connector for the selected input. A digital audio input connector
must be assigned if no analog audio input connector is assigned.
When no analog audio input connector is assigned, the MC-12
automatically sets the:
• MAIN ADV menu INPUT SELECT parameter to DIGITAL
• INPUT SELECT menu ZONE2 IN parameter to DIGITAL
• INPUT SELECT menu RECORD IN parameter to DIGITAL
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX
DVD1 DIGITAL IN
COAX-1
COAX-2
COAX-3
COAX-4
COAX-5
COAX-6
OPTICAL-1
OPTICAL-2
OPTICAL-3
OPTICAL-4
OPTICAL-5
OPTICAL-6
AES/EBU
NONE
DVD1 INPUT SETUP
NAME
DIGITAL IN
ANALOG IN
VIDEO IN
COMPONENT IN
2-CH
MIC LIVE! MED
D
DVD1
COAX-1
NONE
AUTO
S-VIDEO-1
1
FILM
5.1 FILM
FILM
ANLG IN LVL
MAIN ADVANCED
5.1a
5.1a FILM
RECORD ADVANCED
RECORD IN
DIGITAL
ZONE2 IN DIGITAL
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
LIVE! CALIBRATION
Parameter Possible Settings
DIGITAL IN COAX-1 to 6, OPTICAL-1 to 6, AES/EBU, NONE
ANALOG IN ANALOG-1 to 8, 5.1 ANLG (6-8), LIVE!, NONE
ANLG IN LVL AUTO, -18dB to +12dB
VIDEO IN COMPOSITE-1 to 5, S-VIDEO-1 to 8, NONE
COMPONENT IN COMPONENT-1 to 4
INPUTSSETUP
DVD1
DIGITAL IN