Filter
Top Products
Basic Operation Lexicon
2-20
RECORD ZONE TWO-LINE STATUS
Opens on the on-screen and front panel
displays whenever the MC-12 detects a
Record Zone status change. The Record Zone
two-line status indicates the current input, input source, and
volume level selected in the Record Zone.
The ON-SCREEN DISPLAY menu STATUS parameter can control the
length of time for which the two-line status appears on the
on-screen and front panel displays. The ON-SCREEN DISPLAY menu
POSITION parameter can control the vertical alignment of the
two-line status on the display device screen.
Note:
When the display device is connected to a component video output con-
nector and the ADVANCED menu COMPONENT OSD parameter is set to
OFF, the display device does not show the on-screen display, including the
two-line status.
STATUS MENUS
The STATUS menu contains parameters that provide information about
the current input source and listening mode. STATUS menus are
available for 2-channel, Dolby Digital, DTS-ES analog, digital, and LIVE!
input sources.
STATUS menu parameters provide information about the current
input source and listening mode. Some STATUS menus also include
level meters that indicate fluctuating audio input levels. Unlike most
other menus, STATUS menus cannot be opened by selecting menu
options. The remote control command sequence outlined below
must be executed.
To open and navigate the STATUS menu for the current input
source:
1. Press and release the remote control SHIFT button.
2. Press and release the remote control STAT button.
The first page of the STATUS menu for the current input source
appears in the on-screen and front-panel displays.
If the STATUS menu includes a second page, the PG1 indicator
appears in the top-right corner of the menu. Press and release
the STAT button again to open the second page. If the STATUS
menu does not include a second page, pressing and releasing
the STAT button again closes the menu.
3. When the desired STATUS menu page opens, press the remote
control MAIN button, then press the or arrow button to
scroll up or down through the list of available parameters.
4. Press the STAT button to close the STATUS menu. In some
cases, you must press STAT twice in succession to close the
STATUS menu.
Note:
STATUS menu parameters provide information about the current
input source and listening mode. These parameters cannot be
adjusted.
DVD1 D VOL
ZONE 2
-34dB