Filter
Top Products
Setup Lexicon
3-8
ASSIGNING AUDIO & VIDEO INPUT CONNECTORS (continued)
ANALOG IN ANALOG-1 TO 8, 5.1 ANLG (6-8), LIVE!, NONE
Opens the ANALOG IN menu, to assign an analog audio input
connector for the selected input. An analog audio input connector
must be assigned if no digital audio input connector is assigned.
The appearance of the ANALOG IN menu depends on the configu-
ration of the analog audio input connectors.
• The ANALOG IN menu (A below) appears when the REAR
PANEL CONFIG menu 8 STEREO INPUTS option is selected.
• The ANALOG IN menu (B below) appears when the REAR
PANEL CONFIG menu 5 STEREO & 5.1 ANLG option is
selected.
When no digital audio input connector is assigned, the MC-12
automatically sets the:
• MAIN ADV menu INPUT SELECT parameter to ANALOG
• INPUT SELECT menu ZONE2 IN parameter to ANLG
• INPUT SELECT menu RECORD IN parameter to ANLG
Note:
LIVE! cannot be selected until LIVE! CALIBRATION is run. When the
ANALOG IN selection is LIVE!, no other analog inputs (1-8) or digital
inputs can be selected for that input.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
DVD1 ANALOG IN
ANALOG-1
ANALOG-2
ANALOG-3
ANALOG-4
ANALOG-5
ANALOG-6
ANALOG-7
ANALOG-8
NONE
DVD1 ANALOG IN
ANALOG-1
ANALOG-2
ANALOG-3
ANALOG-4
ANALOG-5
5.1 ANLG (6-8)
NONE
A
B
OR
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX
LIVE!
LIVE!
DVD1 INPUT SETUP
NAME
DIGITAL IN
ANALOG IN
VIDEO IN
COMPONENT IN
2-CH
MIC LIVE! MED
D
DVD1
COAX-1
NONE
AUTO
S-VIDEO-1
1
FILM
5.1 FILM
FILM
ANLG IN LVL
MAIN ADVANCED
5.1a
5.1a FILM
RECORD ADVANCED
RECORD IN
DIGITAL
ZONE2 IN DIGITAL
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
LIVE! CALIBRATION
INPUTS
SETUP
DVD1 ANALOG IN