Filter
Top Products
Setup Lexicon
3-26
SPEAKER SETUP PARAMETERS
The table below indicates the speaker setup parameters for config-
uring the Main Zone audio output connectors for the desired
speaker setup. These parameters are available on the CUSTOM
SETUP and THX SETUP menus.
Speaker setup parameters perform the same function regardless of
the selected speaker setup. When a parameter setting is adjusted on
one menu, the corresponding parameter setting is automatically
adjusted on the other menu. For example, when a THX speaker
setup is selected, the speaker setup parameters on the CUSTOM
SETUP menu are set to THX 80Hz.
* These parameters cannot be adjusted on the THX SETUP menu.
† When the THX ULTRA2 SUB parameter is set to OFF, the BGC parameter is not available (N/A).
SPEAKERSSETUP SET CROSSOVERS CUSTOM SETUP
or
SPEAKERSSETUP
SET CROSSOVERS
THX SETUP
Parameter
CUSTOM SETUP Menu THX SETUP Menu
Default Setting Possible Setting Default Setting Possible Settings
FRONT L/R* 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz THX 80Hz THX 80Hz
CENTER* 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE THX 80Hz THX 80Hz
SIDE L/R* 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE THX 80Hz THX 80Hz
REAR L/R 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE THX 80Hz THX 80Hz, NONE
SUB L/R* MONO MONO, STEREO, NONE MONO MONO
SUB XOVER* 80Hz FULL, 30Hz to 120Hz, THX 80Hz THX 80Hz THX 80Hz
LFE* OFF ON, OFF ON ON
THX ULTRA2 SUB OFF ON, OFF OFF ON, OFF
BGC N/A† ON, OFF N/A† ON, OFF
ASA APART APART, CLOSE, TOGETHER APART APART, CLOSE, TOGETHER