Commander GP User Guide
Issue code: gpxu2
Programming Instructions A-5
Quick selection from least to most
significant digit
To select the most significant digit when the
least significant digit is flashing, momentarily
press:
Quick selection from most to
least significant digit
If the most significant digit of the display (not
just the displayed value) is flashing, to select
the least significant digit, momentarily press:
Quick selection of the
least significant digit
Irrespective of the digit that is selected, to select
the least significant digit, press at the same time:
and
Reaching the maximum or minimum value
A special condition arises when both the following
occur:
• A digit other than the least significant digit
(LSD) is being increased, and the maximum
value is approached.
• The displayed LSD is not the same value as
the LSD of the maximum value. For
example: if the displayed value is 126.4, and
the maximum value is 217.9, the displayed
LSD of 4 differs from 9.
The special condition allows the value to be set at
either of the following:
• The highest permissible value that contains
the displayed LSD (eg. 4)
• The maximum value for the parameter
Use the following procedure to see how the
operation works:
1. Ensure the selected digit is not the LSD.
2. Press and hold down
. When the
maximum value is reached, the entire display
flashes the maximum value (eg. 217.9). Release
the key within three flashes of the display. The
display now shows the highest permissible value
(eg. 216.4) that contains the displayed LSD.
3. Again press and hold down
. When the
maximum value is reached, the entire display
again flashes the maximum value (eg. 217.9).
Release the key after four flashes of the display.
The display now shows the maximum value.
When setting the value at maximum in normal
operation, it is not necessary to follow step 2.
The same principles apply when reaching the
minimum value.
