Commander GP User Guide
Issue code: gpxu2
d2
ii
Appendix
A Programming Instructions A-1
A.1 Electrical connections A-1
A.2 Preparation A-1
A.3 Status mode A-2
A.4 Displaying the parameter
number in Status mode A-2
A.5 Entering Parameter mode
and returning to Status mode A-2
A.6 Selecting a parameter to access A-3
A.7 Changing the value of a parameter A-4
A.8 Saving new parameter values A-6
A.9 Flashing and non-flashing digits A-6
A.10 Negative values A-6
A.11 Changing the setting
of a bit parameter A-6
A.12 Selecting a different option A-7
A.13 Restoring the Drive to a default
configuration A-7
A.14 Summary of key operation A-7
B Security B-1
B.1 User-defined Security B-1
B.2 Setting-up User Security B-1
B.3 Unlocking User Security B-1
B.4 Locking User Security B-1
B.5 Summary B-1
C Signal Connections C-1
D Menu 0 Parameters D-1
D.1 Introduction D-1
D.2 Fixed-function parameters common
to all macro configurations D-2
D.3 Parameters specific to the macro
configurations D-8
E Diagnostics E-1
E.1 Status indications E-1
E.2 Alarm indications E-1
E.3 Trip codes E-2
