Filter
Top Products
En
13
Basic Operation
Basic Operation
Connections
1 Connect headphones to one of the [HEADPHONES]
terminals.
2 Connect powered speakers, a power amplifier,
components, etc., to the [MASTER OUT 1] or [BOOTH
OUT/MASTER OUT 2] terminals.
Powered speaker, etc.
! For details on the connections of the input/output terminals, see
Connections (p.7).
3 Connect this unit to your computer via a USB cable.
4 Turn on the computer’s power.
5 Switch the [ON/OFF] switch on this unit’s rear panel
to the [ON] side to turn this unit’s power on.
Turn on the power of this unit.
! For Windows users
The message [Installing device driver software] may appear
when this unit is first connected to the computer or when it is
connected to a different USB port on the computer. Wait a while
until the message [Your devices are ready for use] appears.
6 Turn on the power of the devices connected to the
output terminals (powered speakers, power amplifier,
components, etc.).
! When a microphone, DJ player or other external device is con-
nected to input terminals, the power of that device also turns on.