Filter
Top Products
31
9. Miscellaneous
■
9-4 Function switches
Details of function switches are described in this section.
Function switch
Description
Ent
Set
End
Yes
No
Stop
Store
Del
Moves the cursor upwards.
Moves the cursor downwards.
Moves the cursor to the left or right.
Confirms the selected setting or item.
Confirms the setting.
Terminates the current setting screen.
Increases a parameter value.
Decreases a parameter value.
Accepts the setting.
Cancels the setting.
Poses laser scanning.
Saves the measurement(s) shown.
Deletes the measurement(s) shown.
Function switch
Description
List
Scale
Edit
ID
CLR
Stat
Graph
Cont
Not. Cali
Changes the current screen to Sum-
mary data screen.
Changes the vertical scale for waveform
graphs.
Changes the current screen to Editing
screen.
Changes the current screen to ID input
screen.
Clear the number(s) shown in ID input
fields.
Starts statistic processing.
Regenerates measurements graph from
unsaved data.
Performs additional measurement.
Performs no calibration.
■
9-5 Relocation
Follow the precautions shown below when you relocate this device:
•
Move Main unit so that Main unit sits right on the top of Power Supply unit as shown
in Fig. 1.
•
Press down and tighten Self-locking screw clockwise as shown in Fig. 2.
•
Place your both hands under the Power Supply unit and lift the device. Do not lift
the device using any other part.
•
Make sure there is no bump or dip on the place where you relocate the device.
•
Make sure not to pinch your hands when placing the device in place.
•
Turn counterclockwise and undo Self-locking screw after placing the device.
Fig. 2
Fig. 1
OK
NG
Undo
Tighten
Fig. 3