Filter
Top Products
18
Close the light shade as shown in Fig. 9 for calibration, BG check, and
measurement.
5 Fig. 5 is displayed when calibration is completed.
6 Slide the protective cap back into the original position, and turn Calibrator
counterclockwise to MEASUREMENT position (Fig. 6).
5. Calibration
■
5-2 Light shade
Remove the white cap using a paper crip or other pointed object and
install a light shade (optional) using the screw holes on the top of the
device (Fig. 7).
Calibration
Result
Calibration Cmplete
PMT Sens: 97.1 (%)
Corr.Value: 1.030
Set the Position Calibration tool
to the Measurement.
Fig.5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
When you need to directly check the level of a patient’s eye, lift the light
shade as shown in Fig. 8.