Filter
Top Products
2-33
Static Virtual LANs (VLANs)
Configuring VLANs
Figure 2-21. Example of “Show VLAN” for a Specific Static VLAN
Figure 2-22. Example of “Show VLAN” for a Specific Dynamic VLAN
Changing the Number of VLANs Allowed on the Switch. In the default
VLAN configuration, the switch allows a maximum of 256 VLANs. You can
specify any value from 1 to 256.
Show VLAN lists this
data when GVRP is
enabled and at least
one port on the switch
has dynamically
joined the designated
VLAN.
Syntax: max-vlans < 1-256 >
Specifies the maximum number of VLANs to allow. (If GVRP
is enabled, this setting includes any dynamic VLANs on the
switch.) As part of implementing a new setting, you must
execute a write memory command (to save the new value to the
startup-config file) and then reboot the switch.
Note: If multiple VLANs exist on the switch, you cannot reset
the maximum number of VLANs to a value smaller than the
current number of VLANs.