Filter
Top Products
8. Input
Image 8-38
No signal, auto dimming
2. Press ENTER to toggle between [On] or [Off].
[On] : when no signal, auto dimming is started.
[Off] : when no signal, no auto dimming is started.
8.8 EDID
EDID
Extended Display Identification Data
About EDID
The EDID file available for DVI input connectors includes timings supported by the projector; display size and other information about
the display (i.e. projector). It is the set of information that is used by digital sources connected to the projector to generate a suitable
image signal.
From the OSD, you can for each DVI input connector choose to use the Standard EDID file or create and force your custom made
EDID file. The selection of the EDID file to be used is made in the Configure menu. Making your own custom EDID file(s) is done
through Create.CustomEDIDfiles can be deleted at any time.
The Standard EDID includes two timings: 1920x1200 @ 60Hz / 1920x1080@60H z (for HDX, HDF and APOLLO
projectors) and 2 048x1080@60Hz / 1920x1 080@ 60Hz (for HDQ projectors).
Overview
•Configure an input
• Create custom EDID file
• Delete a custom EDID file
• Delete all custom EDID file
8.8.1 Configure an input
Description
Selecting the Standard EDID file or an own created file can be selected from the list of Custom EDID files for the input.
How to configure
1. Press Menu to activate the menus and select Input → EDID → Configure.
2. Press ENTER to open the EDID configuration menu.
88
R5905032 HDX SERIES 05/12/2014