Filter
Top Products
13. Projector Control
Image 13-29
Default Gateway, input
3. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
13.5.6 Wireless network activation
Can only be used with a wireless network module installed.
What can be done ?
Before a wireless network can be used, the status must be set to On.
How to activate
1. Press Menu to activate the menus and select Projector Control → Network → Wireless setup.
Image 13-30
Main menu, projector control
Image 13-31
Projector control, network
R5905032 HDX SERIES 05/12/2014 229