Filter
Top Products
12. Alignment
The blanking adjustment menu opens.
Image 12-103
Blanking adjustment
3. Use the ▲ or ▼ key to select the desired blanking adjustment and adjust with the ◄ or ► key.
Select Re set to reset all blanking adjustments.
12.10 Contrast-Intensity
Purpose
Contrast : change the contrast of the complete output signal (main and PiP window together) of the projected image.
Intensity : change the brightness of the complete output signal (main
and PiP window together) of the projected image.
How to set up
1. Press Menu to activate the menus and select Alignment → Contrast/Intensity.
Image 12-104
Main menu, alignment
Image 12-105
Alignment, contrast/intensity
2. Press ENTER to select.
Image 12-106
Contrast enhancement
3. Use the ▲ or ▼ key to select Contrast Enh ancem ent.
Use the ◄ or ► key to change the contrast enhancement until the desired value is reached (adjustable between 0 and 5)
4. Use the ▲ or ▼ key to select Intensity.
Use the ◄ or ► key to change the intensity until the desired value is reached (adjustable between 0 and 255)
196
R5905032 HDX SERIES 05/12/2014