Filter
Top Products
13. Projector Control
Image 13-45
Network, wireless
Image 13-46
Network, wireless
2. Use the ▲ or ▼ key to select IP Addr ess and press ENTER to activate the input box.
Image 13-47
Wireless IP address input
3. Press ENTER to open the Wireless menu.
4. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
13.5.10 Wireless subnet mask set up
Can only be used with a wireless network module installed.
Subnet for Wired and Wi fi must be different !
How to set up
1. Press Menu to activate the menus and select Projector Control → Network → Wireless Setup.
234 R5905032 HDX SERIES 05/12/2014