Digital Dosing Units
27
Determining the Calibration Weight
Step 1:
• To start the calibration process, press the calibration key.
Step 2:
• Once the sample container is in position, press .
• The disc will rotate 1/4 revolution and dispense material into the sample
container. After the disc stops, the screen will remain blank.
• This sample should be returned to the material hopper without weighing.
This sample is used only to ensure that all disc pockets are completely filled.
• Replace container in calibration box (or under material outlet tube)
Step 3:
• Press
to take a sample for weighing.